I had to pull the trigger, after seeing them and loving what I saw, I purchased an Red Endo from Innovapes. Sheryl hooked me up and I'm very happy. Now that it's almost delivered, I want to top it off. I love the look of all the Purge mod gear and mods but I haven't read a lot about the performance of the Head Shot RDA. Looks awesome. I love the original top cap of the Purge RDA, looks like a Kennedy and Revolver had a demonic coupling.
But air flow and how well to build on is something I…
Bought an Endo Armor..34mm Headshot?
I've been vaping and building for a couple years now and I finally picked up my first DNA200 device but have had nothing but problems with my Lavabox. I've uploaded the correct csv files in escribe for the wires I was using, along with selecting the correct profile when using said materials but the problem exists no matter what I do!
I've tried both my different atomizers(Goon and Mutation) and different Clapton and single wrap builds along with different materials (Ti, Ni200) and I…
Lavabox DNA200 Help
Anyone tried these two products by OHMEGA?..Thoughts?
I've been vaping for over three years now, but I'm just getting into rebuildables. I did some research and asking around and landed on either the Avocado 24 or the Limitless Plus. After talking to a guy at a local B&M that has always pointed me in the right direction and been totally honest, even going so far as to tell me when his own merchandise is "crap," I went with the Limitless. I'm getting the hang of wicking it after putting WAY too much cotton in the first few times. I've gone with…
Limitless RDTA Plus wick/wire lifespan
New RDTA from geekvape
Medusa is one of the best creations by GeekVape. It is a new generation RDTA with a simplified inner structure, making assemble and refill extremely simple. This elegant RDTA looks simple and compact, but holds an impressive <a href="http://www.vapininthecape.com/e<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid_c_7.html”>juice capacity of 3ml.
Drip tip height: 10mm
Height of tank: 38mm
Geekvape Medusa RDTA
I LOVE the Dotmod Petri RTA but it's a dual coil deck… And it costs $100CDN -_- … I may end up buying that but I would prefer a single coil deck RTA. Anyone have any suggestions? Not much selection from online Canadian vape stores in Canada.
Anyone ever use Kanthal A1 that's branded as Pure Atomist? Looks like it comes from SoCal, but where is the wire made?
Found some really good prices for this stuff (~$12 for 250' of 26AWG on Amazon), but I've never heard of it. Temco price for the same thing is ~$23, and I know their stuff is primo.
Thanks in advance for the responses!
I am new to RDAs, the recoil is my first RDA. The hits tastes kinda dry. I am sure I am using the right amout of cotton (just a bit of resistance without it moving the coil when I slide it throw). I am also sure that the cotton is saturated and the <a href="http://www.vapininthecape.com/e<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid_c_7.html”>juice well underneath has <a href="http://www.vapininthecape.com/e<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid_c_7.html”>juice in it. I am using a 21 AWG SS wire at 0.14 ohms with 11 wraps I think.
I have also tried an SS staggered fused wire as well, similar dry taste/after taste when I hit it.
What am I doing wrong? Any suggestions are…
Help with Recoil RDA
AugVape reached out to me and sent me a Sample of their upcoming Merlin RDTA for the purpose of getting my opinion on it.
I've been running it through the ringers for the last couple of weeks and I've enjoyed it so far.
It's a 24mm RDTA
Dual post with massive holes
Huge Cotton wick holes
Unique fill method, down between the posts
Initial thoughts are I've been liking it but have a few couple of cons that I reported back to them. I'm going to hold off on reviewing it until they release…
Ro55co's Take on the Merlin RDTA
so ive just been given access to over 1 million dallars worth of industrial machining equipment. lathes, cnc, water jet, 3d printers, laser cutters/etchers, you name it. anyway im likely going to attempt to design and produce my own custom RDA. my only concern is the 510 threads.
is there a die for such a thread? how does one ensure this would be correct? im very familiar with thread sizes and just arent familiar with these ecig connection threads. is it common?
any help is…
creating an RDA