How do my wickes look

Been trying to get my wicking right as I seem to be having muted flavour sometimes and my wicks at discolouring inside the coil a little over a couple of days.
https://www.dropbox.com/s/qkjqyc0syq1b1t5/20161228_213258_001.jpg?dl=0
https://www.dropbox.com/s/rz2e5a4p6z0amca/20161228_213047_001.jpg?dl=0
The tank I am using is an aromamizer supreme and the coils are 3mm parallel Clapton's 28awg with a 36awg wrap paralleled with 26awg and I am running it at 80watts

Resistance Issues with SMOK Micro R2 deck

Hi all,

I've been using 3 separate Smok Micro tanks with the R2 rebuildable deck for about 6 months. I use all of them daily. I replaced the coils once or twice on each one (~.26 ohms) but started with the preinstalled coils. About a week ago tank #1 started getting erratic readings (on the mod) for resistance. It was gaining resistance and sometimes going way out there at like 1.0, 2.0, 5.0 etc. I took the tank apart and cleaned it as well as dry burned the coils, threw it back in and…

Resistance Issues with SMOK Micro R2 deck

Ordering the Avocado today….my first rebuildable and need advice with coils

So I'm ordering the Avocado today. Eventually I would like to build my own coils from scratch, but for now I want to get pre built coils and do the wicking. I have zero experience with building, just know from the numerous articles and threads I've read. No hands on experience. Right now I use both the Baby Beast and the Big Baby Beast. I prefer the .15 ohm coil heads and run them at 55-60 watts in my hohm wrecker g2. I like vapor and LOVE flavor. What kind of coils should I use? I've…

Ordering the Avocado today….my first rebuildable and need advice with coils

Billow v3 leaking issue, also discussing v2 and 2.5

I've had my v3 awhile now and am having issues of it leaking between where the tank meets the deck and the top cap has always been a pain in the ass to push back down. I've never bothered to try to mess with the top cap because I'm so used to it it doesn't bother me anymore, but the leaking drives me nuts. I've tried taking everything apart a few times, reassembling, cleaning everything, and replaced that o-ring, but it still leaks especially when it's in my pocket from time to time. I know…

Billow v3 leaking issue, also discussing v2 and 2.5

And the minds at Augvape bring you the Merlin Mini!!

SO following in the footsteps of the Boreas and Merlin, Augvape and Roxy are releasing a new RTA.. The Merlin Mini. Here are some quick specs and pics of it.

Merlin Mini with single and dual coil decks

24mm diameter

18mm single coil deck with 2 x 2mm post holes (includes two airflow inserts: 1.5mm and 2mm to reduce airflow)

18mm dual coil deck with 2 x 2.5mm post holes

2ml capacity

33.5mm height without drip tip (and 42.5mm with)…

And the minds at Augvape bring you the Merlin Mini!!

Rafale, Crown 2, or Baby Beast RBA?

I'm tired of spending so much damn money on coils so I want to grab at least one or two RBAs and give them a shot. My only experience with them was the stock coil that came with the TFV4, and either I was doing something seriously wrong or that thing sucked!

I don't own a Rafale, but since all the Crown 1 and 2 coils (now that they've got the 2s sorted out) are vertical coils, I was considering getting the Rafale RBA instead of either of the Crowns because they're both horizontally…

Rafale, Crown 2, or Baby Beast RBA?

GeekVape ammit

Just picked up the ammit, and so far kinda disappointed. I might have had unreasonabley high expectations, and I know I need to play with it more. I tried a alien Clapton, I think that's too much coil for this tank so I through a pre-made Clapton to try and it didn't have any flavor. I'll play around with it more this evening. Pretty sure I'll figure it out, I love tinkering!