My starter kit came with CE4 clearomizers and they work well but I was wondering which clearomizers (that are compatible with ego batteries) produce the thickest and most flavorful vapor?
Vaporhood Vape Shop, in S. Torrance, CA.
Specializing in mechanical mod clones (atm, we plan to begin selling some high-end hardware form the Phillipines soon)
also carrying a full line of Innokin products, from the VV starter kit to the VTR.
Villain Vapor, Flavorz, Halo, Mountain Oak Vapors, Nicquid
I’m noticing the output end of my egos are getting VERY hot durring use compared to what I’m used to. With the Kanger, I just figured its because I vape that at 4.7, 4.8 volts, but it’s getting hot on my other tanks at 4.0 volts.
I’d say it gets about as hot as an old style lightbulb. Not hot enough to injure, but it’s unpleasantly hot. Is it broken? Can I fix it? Or are my egos just wearing out? (I vape like a fiend. I’ve been blowing through 1000mah in about a day)
Got a bday present from my friend, a portable vaporizer for weed or wax.
The drip tip can press and feel a spring inside, not yet start to use, base on my experiences i thought its function is to clean the vaporizer chamber after use, novel design…
Have 3pcs replaceable coil heads inside ( 2*dry herb, 1*wax )
Need to say, this cloutank m3 is heating through coil, not vaporize.
Can’t wait to try and hope have more such practical vaporizers appear on the market.
My new Maraxus mod clone came in today, and I was very excited to try it out with one of my Kanger Protank 3’s (only tanks I have). Much to my chagrin, they don’t immediately play very well with the Maraxus. See, the Maraxus has an odd center pin. It’s not flat like most I’ve seen. It has this cylindrical protrusion that fits inside the Kanger’s connection hole. The Maraxus’s pin, with the 18650 battery in it, has no play whatsoever. This leads to the pin pushing the bottom piece of the dual coil up into the housing and either A: hindering its connection, or B: cutting off air flow which makes it not work.
I put a rubber ring around the pin and between it and the battery as a spacer, and it allows the pin to move enough to make a satisfactory connection. It works fine. However, it still pushes the bottom piece of the coil up into the housing somewhat. I’m looking at this as a sort of temporary fix. Without the spacer, and the pin being stationary with no play, would I be able to find a 510 to 510/ego adapter that wouldn’t be hinder by the cylindrical nature of the pin?
I’ve seen a lot of 510-510/ego adapters online, but the bottom connection piece is usually only slightly visible in the pictures and seem to vary. Would just any ol’ adapter suffice?
(Sorry if the picture is huge, it won’t let me re-size it)
<img itemprop="image" src="http://vapincapecoral.com/wp-content/plugins/wp-o-matic/cache/dd5313c152_post-27976-0-78534300-1391145633-thumb.jpg" id="ipb-attach-img-2710-0-50146100-1391275583″ style=”width:100;height:93″ class=”attach” width=”100″ height=”93″ alt=”_20140130_200716.JPG” />
New to vaping and I recently bought an ihybrid from a local vapor store. They set it up for me and everything worked great, for about 4 days. Now it completely stopped working. Batteries are charged, <a href="http://www.vapininthecape.com/eliquid_c_7.html”>juice is full, but when I click the button on the bottom there are no signs of it working.
I would take it back to the shop but I work before they open and after they close, only day I have off is Sunday.
One thing I did notice is the wick seems burnt? It’s pitch black but I only used it for 4 days. Is there something I need to clean? Thanks
I just got one of these and am using a vivi nova tank with a 3 ohm coil, only hitting at 3 volts and it taste very burnt, please he a newb
ok so i bought a set up for my brother off fast tek to try and get him to stop ciggs and switch, evod 1100 mah spinner along with a kpt2 clone or knockoff if you will ( didnt want to spend alot because not sure really if he will make the jump) anywho the coil that came in the single unit was garbage burnt out in mins, no issue i can just rebuild one of the hundred coil units i have. so rebuilt one at 2.5 and screwed it into the base and went to screw it into the tank and would you believe the coil unit post is too wide. so does anyone know where to find coil units with a skinnier post. the tank works great actually except for that part. i can always just rebuild that ONE head but who wants to always do that, not me. say it burns out when he’s out and about or in a hurry always nice to have that spare not a rebuild kit on hand. so yea. also posting this in the general ecig threads too see if i can get more input. thanks guys.
Can you please tell me is e-<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid is must for every e-cigarette? I mean every e-cig contain e-<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid? Or some particular e-cigarette have that?
Any answer should be helpful!!
Thanks in advance..
Hey all, This is john and of-course m new here.
Nice to see all around. You guys are awesome. Hope to see something interesting here!!
Thanks for viewing my thread!! 🙂